New Lambo project!

[peggyontherun]

Cheers i have so say the kit was in some state as you can see from the block sanding but at least this kit will the light of day the amount of kits out there in peoples sheds is unreal

[snowtigger]

I wonder how much those kits in people's sheds go for?

[peggyontherun]

Ok nothing major going on only that my arms well i cant feel them anymore
Drivers side 95% done

Front bumper nearly all done

Passenger side left so start at the rear

First skim of filler

Passenger side bonnet quiet a few dip in it

Ariel shot its just so big

There is a Toyota Mr2 in there somewhere

The line that has to be skimmed

First skim of filler

Sprayed black for low spots

All block sanded and re-fillered the fiberglass whoever layed is pure crap

Getting there pity popi isisnt around

All sanded the first section and a new top line i had to do

Second section skimmed and left to dry as i was wrecked by 4 o clock i had to call it a day as it was 21 degrees out

[princemd]

gorgeous ... sooo beautiful .. man you are doing something fantastic

[peggyontherun]

Lots of skimming going on

All sanded

Alot of low spots

Coming along

Still a bit to do

All the low spots nearly gone

I cut the new closing lines on the front bonnet

Getting there now at last

[nik]

really taking shape now..thats a lot of sanding!!!

[Paul Woods]

You're gonna have a right arm like Popeye, be careful you don't tug your nob clean off lol

Seriously though, looking great, i KNOW how much work all of that is, not to mention my browser shits itself when loading your thread, great stuff.

[peggyontherun]

@ nik - cheers mate

@ Paul Woods - yip my owl arms are fit to drop getting close to primer now about a week away sending off the roof scoop to get it carbon fibered dipped to that will be back in a week then fiberglass the roof work work

After cutting the lines for the front bonnet a bit of sanding going on. All this front section has been made by hand


A bit of filling and sanding on the bonnet

Ok moved the Lambo/MR2 out of the unit for a clean up



Front section getting close to primer

Primed one coat

Underside of the bonnet primed

[peggyontherun]

Drivers rear quater all sanded and pin holes filled


First coat of primer


All wet sanded

Second coat or primer

Bonnet pins on and gapping the bonnet

[peggyontherun]

Two coat of primer on the door and five on the rear quater its coming along now

While the primer was drying i made this

Test Fitted


Primer coat three on the door

Front wing ready for primer

First coat or primer