Cheers i have so say the kit was in some state as you can see from the block sanding but at least this kit will the light of day the amount of kits out there in peoples sheds is unreal
Cheers i have so say the kit was in some state as you can see from the block sanding but at least this kit will the light of day the amount of kits out there in peoples sheds is unreal
I wonder how much those kits in people's sheds go for?
Ok nothing major going on only that my arms well i cant feel them anymore
Drivers side 95% done
Front bumper nearly all done
Passenger side left so start at the rear
First skim of filler
Passenger side bonnet quiet a few dip in it
Ariel shot its just so big
There is a Toyota Mr2 in there somewhere
The line that has to be skimmed
First skim of filler
Sprayed black for low spots
All block sanded and re-fillered the fiberglass whoever layed is pure crap
Getting there pity popi isisnt around
All sanded the first section and a new top line i had to do
Second section skimmed and left to dry as i was wrecked by 4 o clock i had to call it a day as it was 21 degrees out
gorgeous ... sooo beautiful .. man you are doing something fantastic
Lots of skimming going on
All sanded
Alot of low spots
Coming along
Still a bit to do
All the low spots nearly gone
I cut the new closing lines on the front bonnet
Getting there now at last
really taking shape now..thats a lot of sanding!!!
You're gonna have a right arm like Popeye, be careful you don't tug your nob clean off lol
Seriously though, looking great, i KNOW how much work all of that is, not to mention my browser shits itself when loading your thread, great stuff.
@ nik - cheers mate
@ Paul Woods - yip my owl arms are fit to drop getting close to primer now about a week away sending off the roof scoop to get it carbon fibered dipped to that will be back in a week then fiberglass the roof work work
After cutting the lines for the front bonnet a bit of sanding going on. All this front section has been made by hand
A bit of filling and sanding on the bonnet
Ok moved the Lambo/MR2 out of the unit for a clean up
Front section getting close to primer
Primed one coat
Underside of the bonnet primed
Drivers rear quater all sanded and pin holes filled
First coat of primer
All wet sanded
Second coat or primer
Bonnet pins on and gapping the bonnet
Two coat of primer on the door and five on the rear quater its coming along now
While the primer was drying i made this
Test Fitted
Primer coat three on the door
Front wing ready for primer
First coat or primer