Price check...

[cantfindausername]

Ok, so the cams are pretty shagged on Ninas v6, so I have got a price for them from Toyota.

I also got some other parts prices while I was there and would like the list checked incase we forgot anything. This is copied directly from the print out I got from them...

TIMING BELT - 13568-69025 - £37.33 +vat
T13505-20020/IDLER - 13505-20010 - £66.84 +vat
CHAIN TENSIONER - 13540-62020 - £34.34 +vat
SHAFT, TMNG BELT - 13556-62010 - £7.41 +vat
IDLER, CAM BELT - 13503-62030 - £59.42 +vat
T16100-69335/WATER - 16100-69455 - £94.31 +vat
OIL PUMP - 15100-62030 - £88.62 +vat
N/STK GSKT, WATER OUT - 16325-62010 - £3.10 +vat
THERMOSTAT - 90916-03075 - £13.58 +vat
ROTOR ARM - 19102-62030 - £11.29 +vat
DISTRIBUTOR CAP - 19101-62050 - £17.83 +vat
BOLT (HEAD) - 90910-02077 - £80.96 +vat
T96711-35031/O-RING - 96761-35931 - £2.48 +vat

Does this list look right from other build that have been done??

Thanks,
Ant :freak3:

[GaryA]

Have a look at rockauto i got most of that stuff from the states at a lot less turned up in under a week .

[cantfindausername]

How are their prices compared to these do you know? I'm also concerned incase I don't get the right bits on this as its for Nina. lol

[GaryA]

Well my water pump was £20 thermostat £8 tensioner roller £17 , then a bit for shipping and didn't get any duty . But if you get Toyota you know it will last a long time .

[cantfindausername]

Thanks mate. Will have a gander and see if they can sort the parts.

[Marksman]

Bearings?

O.S.

[cantfindausername]

Haven't got the crank out yet. Want to see if the heads are usable first.

[superchargedsam]

how much were the cams then?

[cantfindausername]

Toyota retail at 141.10 each + vat.

[superchargedsam]

hmm not as bad as i thought they might be!