Hub geometry post from a while back

[djdna2000]

Hi all

Someone put up a post a while back where they had measured the relevant distances from hub face to spring etc to see whether particular size/offset wheels would clear the springs and brakes. I am weighing up whether to go with some ST205 wheels sat in my garage redrilled for 4x100 (from 5x100).

I can't remember which words to search for!

[djdna2000]

Oh and Paul, you say in the big brakes article that the ST205 disc is 55 mm centre hole, but I'm pretty sure it's 54.1 mm (at least the wheel is). I might have a play around this evening.

[David Sleith]

What, your going to play with yourself over a set of discs :o

Now that just is Two Brutal!

[adamh]

i'm sure they'l fit with , i'm sure there bigger than 54.1 too, ive machined a few pairs, i could have sworn they were 55mil on the brake discs, otherwise theres no way i would bore them out and sleeve them.. :-k maybe the wheels are a tighter size?!.. ive never actuially measured a st205 gt4 hub, but have the disc bores..

[Paul Woods]

yeah the st205 are 55mm centre hole diameter,i had to have mine taken out by 3mm and a 4mm spigot ring inserting....it would be nice if they were 54.1 like a mk1 disc is.