Cheapest ST205 discs so far ?

[superchargedsam]

Need a couple of sets of these so have been looking everywhere for them and someone on here posted a link for seriously cheap AW11 discs the other day and checked out the costs for the above discs with them and come in at ?130 for the pair which I thought wasnt too bad for these huge discs ! Anyone know of any cheaper anywhere ?

https://sslrelay.com/buypartsby.co.uk/discs_details.php?recordID=7817

[Jiff Lemon]

you in a big rush for these sam?

I'll check to see if i can swing some of my uber discount at a pair.

[superchargedsam]

jiff if you can get em cheaper than that fella would be well happy ! Need 2 pairs, niether urgent but will need one pair by end of august ! uber drink tokanage if you can fella !

[mr2aw11turbo]

you in a big rush for these sam?

I'll check to see if i can swing some of my uber discount at a pair.

I am after a pair as well, disks and pads needed, anyone else intrested?

[Murf]

I got a pair for my GT4 from here:http://www.toyotalexusspecialists.co.uk/index.php?act=viewProd&productId=7 for ?139 with free postage i think. They were genuine toyota as well and you dont realise how big they actually are till you go to fit them, they're MASSIVE!!

[firstmk1]

I've got a pair of discs in my garage that I need to get shut of. They need skimming but I'll only need some pennies for the postage.

[adamh]

what type of disks ian?

[firstmk1]

the large st205 jobs. Bought them thinking they were the earlier type :doh:

[adamh]

woooo :praise2: :drool:

[superchargedsam]

Ian how much you after for them fella and do you have any verniers to measure thickness as ones I have just had done for celica are quite thin and want something quite thick for the MR2 conversion ! Let me know on here or via MSN ! Cheers fella !

[firstmk1]

I have a lovely pair of digital calipers that I'll put to use tomorrow. I'll also check postage cost with my new super secret source :shhh:

[superchargedsam]

cheers ian your a star !

[firstmk1]

a disa-star!

[superchargedsam]

oh no fella why a disaster ?

[keri-WMS]

The HUGE discs to go with the ST205 4-pot setup are the only ones I can't source!

HOWEVER - How many people would like an alloy bell / rotor to fit a AW11 strut with the ST205 4-pot? If someone can lend me a caliper I'll cad it up and put it in the "to be machined list"... :nerd:

For reference, here are the relevant discs I CAN supply in case it helps:

86/020 - ?45.06+vat/pr AW11a front
32/031 - ?64.51+vat/pr AW11a rear
33/009 - ?64.51+vat/pr AW11b front (usually out of stock with my supplier!)
32/095 - ?49.44+vat/pr AW11b rear
35/050 - ?27.04+vat/pr SW20 90-91 front 258x25
35/051 - ?27.84+vat/pr SW20 90-91 rear 263x17
33/035 - ?64.09+vat/pr SW20 92-on front 276x31
33/036 - ?48.22+vat/pr SW20 92-on rear 280x23
34/033 - ?62.72+vat/pr ST202 275x28, 55mm bore
34/010 - ?42.14+vat/pr ST185 277x25, 54mm bore
33/005 - ?38.43+vat/pr ST165 255x25, 54mm bore
33/048 - ?32.06+vat/pr ST182 255x22, 54mm bore (handy & CHEAP AW11b alternative if drilled!!!)
33/017 - ?46.78+vat/pr Golf G60 280x22

Phew!!! You lot can have 10% off of course as you're mad... :nuts:

UK Zone1 48h shipping is ?10+vat up to 30kg so you can get 2/3 pairs of discs per box if you want.

[superchargedsam]

Keri I have one or 2 spare calipers here at the mo (spare as have no ruddy discs to go with them) so could send one down ! Am i right in thinking if its done with an ally bell it would just need the rotor replacing, and would it work with stand mofo big pads ?

[keri-WMS]

Keri I have one or 2 spare calipers here at the mo (spare as have no ruddy discs to go with them) so could send one down ! Am i right in thinking if its done with an ally bell it would just need the rotor replacing, and would it work with stand mofo big pads ?

Great stuff, have you got any new pads by the way...! With luck I can squeeze the ST205 pads onto an existing standard motorsport rotor... :pray: I can get custom ones made up anyway if not. When the rotors wear you just replace that part - the bell is re-used.

This setup will save a LOT of unsprung/rotating mass! :jump:

Drop me an email at: wms@ keri.c o.u k (remove spaces) and we'll firm up a plan and agree the beta-tester mate's rates! :mrgreen:

[superchargedsam]

nice one cheers fella, I also have the AP front set up using the bell rotor setup which are massive but damned priecy so rekon this setup could be spot on, yes have some green stuff pads but if they need to be brand spanking new I will just buy some cheapy ones from local factors for ?13 if need be for testing !

[keri-WMS]

nice one cheers fella, I also have the AP front set up using the bell rotor setup which are massive but damned priecy so rekon this setup could be spot on, yes have some green stuff pads but if they need to be brand spanking new I will just buy some cheapy ones from local factors for ?13 if need be for testing !

That would be spot on! :praise2:

Drop me a line when you're ready...

[superchargedsam]

ok will get a caliper cleaned up and sent down next week then fella ! can you do rotors like these:

http://s9.photobucket.com/albums/a62/superchargedsam/?action=view&current=P1010033.jpg

http://s9.photobucket.com/albums/a62/superchargedsam/?action=view&current=P1010035.jpg

[keri-WMS]

ok will get a caliper cleaned up and sent down next week then fella ! can you do rotors like these:

http://s9.photobucket.com/albums/a62/superchargedsam/?action=view&current=P1010033.jpg

http://s9.photobucket.com/albums/a62/superchargedsam/?action=view&current=P1010035.jpg

We're designing the new bigger (budget) rotors to share the AP Racing I.D. and PCD etc... So you SHOULD be able to upgrade to silly-expensive AP rotors if you've got a (future) 320/330mm WMS kit. That said, I can't say for sure that the swap will work the other way, ie the idea isn't that you can use WMS rotors on AP kits - although you might be lucky depending on the design of the AP kit's bell.

The 298.5 and 310mm rotors should fit WMS bells as well via some clever jiggery-pokery, these are the Wilwood spec that's very common in the USA etc.

[superchargedsam]

all sounding good fella !

[firstmk1]

I can't find those discs and as the garage was cleaned the other week I guess they've been chucked. Sorry Sam

[superchargedsam]

DOH ! what a waste !

[Mistertwokw]

Can anyone tell me what callipers and size of wheel i can get away with if i use st165 discs, i have a 1a car.