Fuel Pump Relay

[mart1975]

do we need this? i turned my key today and the fuel pump did not run, you should be able to hear it right?
im sure i hadthe relay connected before though i cannot find the connector for it. ive searched everywhere, im sure it was on the main loom????

[robwsurf]

Yes you should be able to hear the pump. but use the mk1 relay if i remember correctly will check, mk2 relay has two settings for pump mk1 has one

[robwsurf]

just checked i used mk1 relay in the fuse box then it goes to pin18 on N1 plug and then to your ecu, hope this helps.

[mart1975]

i dont mean the cor, ive got that wired already

[robwsurf]

sorry mate been a while since i wired up mine, got it wrong, it s wired direct to COR, and everything else off the COR works, if the pumps not working its got to be fuel pump connections

anyone else think of anything else?

[Paul Woods]

just to add,a mk1 doesnt have a fuel pump relay as such,it uses the COR as a feed...we dont need to wire up the mk2 fuel pump relay either,it looks like its an immobiliser problem on marts car.