Jiffys 2zz frankenbox

[Paul Woods]

I agreed to build our hero a special gearbox, one that combined the best of all worlds for his 2zz engine.

So he sent me a Corolla T sport box, the plan being to use the 1st-5th gears to keep his 2zz in lift all the time, if you use a 1zz box it falls out of lift during gearchanges. Then swap in a Mk3 LSD unit, and a Mk3 6th gear pair to give him extra long legs on the motorway.

So this is my gearbox building station with lots of custom made tools that enable me to build gearboxes and a bearing press for reassembly.

Here is the Corolla T sport box....

http://www.twobrutal.co.uk/forum/images/recovered/2015/05/2.jpg

With my special home made puller i stripped the 5th and 6th gear assemblies down...

http://www.twobrutal.co.uk/forum/images/recovered/2015/05/3.jpg

http://www.twobrutal.co.uk/forum/images/recovered/2015/05/4.jpg

Before too long we end up with a gearbox exploded out all over the place....

http://www.twobrutal.co.uk/forum/images/recovered/2015/05/5.jpg

Then i started work on this 30k 1zz 6 speed, we want this for the LSD, the cases and the 6th pair.

http://www.twobrutal.co.uk/forum/images/recovered/2015/05/6.jpg

That too got blitzed apart until i was just left with the lower case, which then got steam cleaned, immaculate.

http://www.twobrutal.co.uk/forum/images/recovered/2015/05/7.jpg

The crown wheel from the 2zz diff needs using on the LSD diff, they look very similar but if you used the 1zz diff with the 2zz internals very bad things would happen!

http://www.twobrutal.co.uk/forum/images/recovered/2015/05/8.jpg

Final assembly starts, LSD in, 2zz internal gears in, but lets use the shiney 30k 1zz selector stuff, why not.

http://www.twobrutal.co.uk/forum/images/recovered/2015/05/9.jpg

The cases built back up and the Mk3 6th set installed...

http://www.twobrutal.co.uk/forum/images/recovered/2015/05/10.jpg

And there we have it, one 2zz/LSD/Mk3 longer 6th custom built gearbox.

http://www.twobrutal.co.uk/forum/images/recovered/2015/05/11.jpg

[Jiff Lemon]

Just gobsmacking. I've got mates in the trade who still treat gearboxes as "farm it out" job, yet you literally blitzed it in half a day.

[Paul Woods]

Yep around 4 hours to strip both boxes down and rebuild the new one, to be fair i didn't have to preload the diff on this one because it came from the cases we used, that saved a good hour.

[Goldy]

Awesome work, its like watching the mechanical equivalent of open heart surgery!

[Paul Woods]

Next week..... open heart surgery.... fuck it, why not. :)

[Grenade]

Hey, I might be a candidate for that open heart surgery hahaha, not really.
Great work on that trans. I have never taken apart a front wheel drive manual box. I have however, done several T5 trannies from the fox body Mustangs. Those things are a breeze to rebuild.

I would have paid 100 quid for a step by step "how to" video with proper part numbers and exact procedures on how to do what you just did. As a matter of fact, that's how I learned how to rebuild a Manual 5 speed gearbox. I bought this guy's DVD and had it playing in the laptop while I did it.

Next time you rebuild a FWD manual gearbox, make and sell videos because people would buy them. Nice work!

[Phaeton]

Paul, What are the options with a Celica 6 speed & a MR2 5 speed with LSD fitting onto a 2ZZ for a track orientedish car that has to be driven there.

[Jiff Lemon]

You definitely need celica 1-5; otherwise you'll be falling out lift. I'm gonna to guess your only options would be around the diff size and 6th gear. The Mr-s has a shorter diff, but I think that could make for an ear bleeding experience on the motorway.

Edit: just checked.
Mr2 6th gear = 0.725
2zz 6th gear = 0.815

Diffs:
MR2 uk = 3.941 (LSD)
MR2 JDM = 4.312 (non LSD)
Celica uk = 4.529 (non LSD)

[Paul Woods]

Also you have to match the crownwheel to the final drive, so that rules out using anything other than the 2zz internals throughout 1-5 and the diff final..... but you can have the Mr2 6th pair for longer motorway legs and a LSD.

[Phaeton]

So apart from the LSD the MR2 5 speed is not a lot of use, is it possible to buy the 6th gears, or is it easier just to buy a 6 speed MR2 box?

[Paul Woods]

Yep you can buy the 6th pair from Toyota, but to be honest all Mr2 6 speeds come with the LSD, so you kill two birds with one stone buying an Mr2 6 speed, then combine those parts with the 2zz box.

[headcase]

So apart from the LSD the MR2 5 speed is not a lot of use, is it possible to buy the 6th gears, or is it easier just to buy a 6 speed MR2 box?

yea i got the part numbers for 6th if you want but as paul says it be cheaper to get the second hand box as you will need the select shaft as well as reverse lock out gears are going to cost you 240 pound roughly then the select parts is going to be from mr t 280 or you get a shaft and bits from monkeywrench then you can take the selector bit of the 5speed and use on the mwr shaft

[Phaeton]

Just to jump on this as I can't find a sales section anymore, I have one of these boxes, from a MR2 & a T-Sport Celica (not Corrola), put together by Mr Woods, I supplied the 2nd hand boxes to him for sale. I think at a fair price for somebody on here of £500.