JD2
11-08-2014, 14:45
Hello TB - I thought I'd skip the introduction and jump straight in with a question.
I've got one of those fancy aluminium cold pipes from my SMIC and I want to tap it for a w/m injector. The ally is only 2mm thick so not enough room for the 27tpi thread required. Could I possibly tap the cold side of the IC itself?
JD
edit - been advised that welding on a boss is best - will find someone who can do that.
I've got one of those fancy aluminium cold pipes from my SMIC and I want to tap it for a w/m injector. The ally is only 2mm thick so not enough room for the 27tpi thread required. Could I possibly tap the cold side of the IC itself?
JD
edit - been advised that welding on a boss is best - will find someone who can do that.