View Full Version : rear wheel bearings where and what do i need
filancia
17-06-2014, 08:35
I have used a e reg mk1 mr2 as a donor for the fiat project and i am starting to build back up the rear.
I have seen there is a difference in wheel bearings for the mk1a and the mk1b what did i have if it was an e-reg.
Cheers
Simon
cdwood2010
18-06-2014, 00:39
Hi Simon,
E reg was most likely a Mk1b. There's a couple of comparison write ups if you Google it, but generally Mk1a cars went out with triangle pattern alloys, Mk1b with teardrop alloys.
Just in case that helps.
C.
cdwood2010
18-06-2014, 00:40
http://www.imoc.co.uk/forums/viewtopic.php?t=45035
filancia
18-06-2014, 08:29
Ah ok, well i still have one hub with the bearing in it, the worst case scenario i can strip it out and measure it.
Tommytank
20-06-2014, 15:57
Its a 1b Si!
filancia
25-06-2014, 09:37
Cool, I'll get a pair ordered up for the build up of the rear hubs.
Cheers guys.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.