Flywheel bolts $@&!?

[ThePianoMan]

I was gonna go see mr Toyota today, as need
some fly wheel bolts, but after coming on here
to confirm what I need I'm now confused.

3vzfe into a mkII with a standard box n clutch.
MkI bolts needed, but seen a couple diff part numbers
listed here, so which do I need?
Cheers

[ThePianoMan]

Oh, and that's with a modded mr2 flywheel

[snowtigger]

I have seen the mk3 flywheel bolts mentioned as being the right length and pitch to accommodate the flywheel on a 3vz?
That's we're your different part numbers probably come from.

The dark lord said you don't have to cut them to length then, but always check the engine rotates with the fly wheel bolted up as a just incase, it could be a fidanza flywheel not a standard modified one though as normaly you put the spreader plate in the centre to even out the loading on a drilled fly and that is a couple of mm thick.

Best wait do he who should not be named to come and sort.

[headcase]

these are the bolts i used but these were on fidanza flywheels one on 3vzfe and one on 2gr-fe
this is flywheel bolts and cover plate bolts
90105-10138. And. 90119-08079.
patrick

[ThePianoMan]

Cheers, that's another different part number again,
maybe as it was for a fidanza

[headcase]

this is what they fit from standard plus more
Tundra 2002.08-2004.08 6cyl 3.4L MTM SR5
Tundra 2002.08-2004.08 6cyl 3.4L MTM DLX
Tundra 1999.02-2002.08 6cyl 3.4L MTM SR5
Tundra 1999.02-2002.08 6cyl 3.4L MTM DLX
Tacoma 2000.09-2004.09 6cyl 3.4L MTM SR5
Tacoma 2000.09-2004.09 6cyl 3.4L MTM DLX
Tacoma 2000.09-2004.09 6cyl 3.4L ATM DLX
Tacoma 1995.01-2000.09 6cyl 3.4L MTM SR5
Tacoma 1995.01-2000.09 6cyl 3.4L MTM DLX
SOLARA 1998.06-2002.07 6cyl 3.0L MTM CP
Camry 1996.07- 6cyl 3.0L MTM LE
Camry 1996.07- 6cyl 3.0L MTM CE
Camry 1992.09-1993.09 6cyl 3.0L MTM SE SED
Camry 1991.06-1993.08 6cyl 3.0L MTM SE SED
Camry 1991.06-1993.08 6cyl 3.0L MTM LE SED
Camry 1989.09-1991.09 4cyl 2.5L MTM DX SED
Camry 1988.08-1991.06 4cyl 2.5L MTM LE SED
Camry 1988.08-1991.06 4cyl 2.5L MTM DX SED
Camry 1988.02-1988.08 4cyl 2.5L MTM LE SED
Camry 1988.02-1988.08 4cyl 2.5L MTM DX SED
4Runner 1995.11-2000.08 6cyl 3.4L MTM SR5V
PASEO 1995.08- 4cyl 1.5L MTM CVT
PASEO 1995.08- 4cyl 1.5L MTM CP
PASEO 1991.04-1995.08 4cyl 1.5L MTM
TERCEL 1994.09- 4cyl 1.5L MTM STD 2DS
TERCEL 1994.09- 4cyl 1.5L MTM DX 4DS
TERCEL 1994.09- 4cyl 1.5L MTM DX 2DS
TERCEL 1990.09-1994.09 4cyl 1.5L MTM STD 2DS
TERCEL 1990.09-1994.09 4cyl 1.5L MTM LE 4DS
TERCEL 1990.09-1994.09 4cyl 1.5L MTM LE 2DS
TERCEL 1990.09-1994.09 4cyl 1.5L MTM DLX 4DS
TERCEL 1990.09-1994.09 4cyl 1.5L MTM DLX 2DS
TERCEL 1988.08-1990.09 4cyl 1.5L MTM STD SED 5DS
TERCEL 1988.08-1990.09 4cyl 1.5L MTM STD SED 3DS
TERCEL 1988.08-1990.09 4cyl 1.5L MTM STD SED 2DS

[Paul Woods]

I only use Mk3 bolts, they are the correct length and do not need cutting, just order a set of those and be done with it.

[ThePianoMan]

Sounds good to me, they the numbers headcase stated above?

Apologises for the done to death question.