Log in

View Full Version : ignitor 3vz-fe


mjones16
06-12-2009, 19:44
Had a look in the search there for help with the ignitor, cant find anything.

I am changing my 3sge ignitor with the 3vzfe one, however i have noticed that the hole spacing on the 3sge bracket wont pick up the holes on the V6 ignitor.

Is it best to use the V6 bracket or what have others done with this?

Cheers
Paul Woods
06-12-2009, 19:50
Everyone just uses the 3vz ignitor.
mjones16
06-12-2009, 20:01
on the 3vz bracket Paul or do you change the bracket over?
Paul Woods
06-12-2009, 20:26
No not at all, we use the 3vz bracket.
mjones16
07-12-2009, 08:26
No not at all, we use the 3vz bracket.

Cheers Paul

Will re locate to the strut turret on the 3vz bracket
Garbe
07-12-2009, 14:01
Check my build thread, I cut the two mounts up and made a bastard mount, and was able to mount the ignitor in the orignal mk2 location.
mjones16
08-12-2009, 12:12
Check my build thread, I cut the two mounts up and made a bastard mount, and was able to mount the ignitor in the orignal mk2 location.

Cheers mate,

I have mounted mine on the strut turret and relocted the charcole cannister to the side vent next to the fuel filler pipe.

Mark