View Full Version : 3vz-fe Forged internals?
MkII_5SFE
11-07-2009, 05:21
:blah:
Been searching the interweb's for months now, cant find a thing.
More specifically, I am looking for Forged Con-rods and piston heads.
I Know the crank is forged as it stands, so thats fine.
But im not taking ANY chances.
This bad boy WILL be turbo'd at some point.
So forged internals off the bat is a must for me.
Anyone got anything?
Cams, valves, springs, retainers are also a must.
Thanks
Not sure where you are geographically, but Arias and Pauter have pistons and rods, respectively.
Not sure about the other bits, though. Only place I know of that sourced them was S2S, and their inventory has since been liquidated due to economic reasons. :cry:
Here ya go mate
http://www.vmotorsport.co.uk/site_flash/ :tempted:
Here ya go mate
http://www.vmotorsport.co.uk/site_flash/ :tempted:
Our suppliers have dried up mate ... go straight to the main guys @ Arias and Pauter.
PhantomSi
12-07-2009, 17:45
Our suppliers have dried up mate ... go straight to the main guys @ Arias and Pauter.
Does that mean you don't have any valves or valve springs available either?
nothing mate - am expecting some last bits over, but there's not a lot left!
MkII_5SFE
13-07-2009, 07:33
http://www.vmotorsport.co.uk/catalog/index.php?cPath=21&osCsid=75h6arphvqib3o2ei40q6c12g6
these clowns still have em in stock?
no luck on the Actual Manufacture sites
http://www.vmotorsport.co.uk/catalog/index.php?cPath=21&osCsid=75h6arphvqib3o2ei40q6c12g6
these clowns still have em in stock?
no luck on the Actual Manufacture sites
Yea, those clowns are us - we've been told we can still get them - but the reality is a bit different ...
GregLeBon
13-07-2009, 10:52
Yea, those clowns are us - we've been told we can still get them - but the reality is a bit different ...
OOPS! lol
MkII_5SFE
13-07-2009, 16:13
Yea, those clowns are us - we've been told we can still get them - but the reality is a bit different ...
oh my bad, i wasnt meaning clowns in a bad way, i do hope you understand
I use it generically, i also use knucklehead and gooberyashi
Apologies if i offended.
So you say the reality is a bit different, meaning. No way?
oh my bad, i wasnt meaning clowns in a bad way, i do hope you understand
I use it generically, i also use knucklehead and gooberyashi
Apologies if i offended.
So you say the reality is a bit different, meaning. No way?
No worries, I often refer to Paul Woods as that fucking idiot from Durham. It's a term of endearment!
As for the parts - we enquire
"What's the stock levels on xxx, and current unit price".
They'll come back with "We have plenty, and price is xxx" - so we'll go "Cool, whats the lead time on getting x amount sent over"
Then we get no reply :)
MkII_5SFE
18-07-2009, 12:47
No worries, I often refer to Paul Woods as that fucking idiot from Durham. It's a term of endearment!
As for the parts - we enquire
"What's the stock levels on xxx, and current unit price".
They'll come back with "We have plenty, and price is xxx" - so we'll go "Cool, whats the lead time on getting x amount sent over"
Then we get no reply :)
what a bunch of fucking assholes
we should send these guys over
:warrior:
MkII_5SFE
18-07-2009, 12:47
nothing says "YOU SUCK" like getting beat to death with a keyboard
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.