MK1 ST205 Wheel Fitment Guide

[Gary Symons]

Hopefully this will be of use to anyone contemplating fitting a set of ST205 front stoppers to their MK1.

To be used as a guide only, dont blame me if your brakes dont fit after using this!

Download Here:
http://www.mr2mk1turbo.co.uk/files/ST205%20Brake%20Fitment.pdf
Note: this should print out at 1:1 scale if you turn off page scaling.

First mockup:
http://www.mr2mk1turbo.co.uk/files/st205-1.jpg

Here you can see the issue I had with my wheels:
http://www.mr2mk1turbo.co.uk/files/st205-2.jpg

Finally with a 6mm wheel spacer fitted:
http://www.mr2mk1turbo.co.uk/files/st205-3.jpg

[adamh]

most excellent gauge ori-gary :) . i see dimensions on the gauge, can these be referenced with a ruler?

[Gary Symons]

most excellent gauge ori-gary :) . i see dimensions on the gauge, can these be referenced with a ruler?

I dimensioned up the template in case there was a problem printing it out at full scale so it could be checked or redrawn manually. It is not mm perfect but if the gauge fits the wheel I am pretty confident that the calipers will.

[Jiff Lemon]

Fan Flipping tastic stuff that Gary :thumbsup:

Something so simple, yet so invaluable, shared with our membership. Thats the good old fashioned TB spirit :)

[Murf]

Good work, what a smashing idea!

[snowtigger]

should be a sticky in the definate wheel fitment area.

[Gman]

This website has been suspended. Please contact support via http://www.123-support.co.uk/

[nik]

anyone have a copy of the .pdf for the tb server..? and images?

[snowtigger]

Probably on the pc at home mate in mr2 folder will look when back home from the pub.

That's if there's no fooling copyright bollocks going on with a fooling template.

[grash2]

looking as well, i should have it somewhere, as i have printed it like 20 tims :P so far no luck tho