1MZ Shopping list Mk2

[Whore of Babylon]

Good morning friends

I think its time to do my shopping list for my Mk2V6

(Stuff i have/bidding for on ebay)
4V6 1MZ mount (curently abstract art in my bedroom)
E153 Manual transmission with TRD LSD (With Sinkro kit)

(Wrecked camry in my local wreckers)
~1MZFE 1999
~ECU
~Wiring loom (Uncut)
~Alternator
~A/C Compressor
~Immobilizer (If fitted)
~OBDII port (under dash)
~Evap canister
~Airbox
~Rear motor mount/axle carrier.
~Secondary cats?
~Charcol canister
~Vapor pressure sencor (Atached to Charchol canister)
~Fill check valve
Have i forgot anthing?

(Stuff i need to order online)
~Camry Flywheel (I need a pic explaining how to modify it)
~Gasket set
~Clutch (Do i get a MR2 or camry clutch?)

This my list i have is made up from reading Dave Mush' build, thanks Dave for your info.

I need info on what to do with the axles, im asuming the turbo box axles has to be modified.

[Garbe]

IF you're using a MK2 box then you shouldn't have to modify the drive shafts at all.
Flywheel - if you use a manual camry flywheel you don't need to modify it. It's only if you use a MR2 na flywheel, that needs to be modified to fit the 1MZ. MR2 turbo flywheel should be bolt on.

[Whore of Babylon]

Wow.....1MZ + Mk2, a match made in heven.

Thank you, for your help.

I think im about to be given a 1MZ from my Toyota dealer, all i have to do is replace the big end. Long story short, always say please and thank you and feel free to reward helpfulness with a bottle of wine.