View Full Version : Robwsurf's post headgasket gone mk1.5 refurb
robwsurf
13-04-2008, 18:41
Right i never really did an ongoing post of my intial build but now i ve got garage to fix my car after headgasket went last year thought i d start one.
when i built my car i had a strict time limit due to doing it at work so not everything got done how i wanted it too, so now i m sorting and tidying things up.
Work is abit slow as in small garage and only power from a 6kva generator
so far rear spoiler plumley mod underway, rear access panel welding up, charge cooler fitted, gearbox rebuilt, headgasket and waterpump replaced
to come...
turbo vents in engine lid
vented bonnet
st205 and mr2 turbo rear brakes
will be taking lots of pics asap
lotus carlton bumper fitted to front
wideband
blitz power meter
boost controller
dastek unichip
full respray by me
and if money allows thinking about nur spec exhaust
and s2000 dash conversion
pics to follow
robwsurf
14-04-2008, 17:45
how do i post pics in here.
Tim Higgott
14-04-2008, 17:59
Goto photobucket and upload them there. Read the instructions on photobucket about copy and paste and away you go. Ive just done it and was easy.
Good luck with the project, will be watching.
:popcorn:
robwsurf
14-04-2008, 20:57
http://www.twobrutal.co.uk/forum/images/recovered/2008/04/143.jpg
http://www.twobrutal.co.uk/forum/images/recovered/2008/04/144.jpg
S2000 dash and the interface i m hoping i can get to work with speedo drive and the dash
robwsurf
15-04-2008, 22:34
looking forward to weekend, and back to working on my car, hopefully finish engine bay and take pics, then start stripping off suspension and changing bushes. and repair wheel arch, engine lid mods, and boot lid repairs.
robwsurf
16-04-2008, 17:17
Some other bits arrived today got a dastek chip for 60 quid it came with another module dont think its a boost one can anyone identify it? a code on it 002996
http://www.twobrutal.co.uk/forum/images/recovered/2008/04/158.jpg
http://www.twobrutal.co.uk/forum/images/recovered/2008/04/159.jpg
msherry21
16-04-2008, 17:36
I'm pretty sure thats the boost module mate. Pretty good wee box of tricks, I have one at the moment on the mk2.
robwsurf
16-04-2008, 17:51
thought the boost module had a pipe on it though this has a plug with 5 wires and a small screw next to it and one screw in the back
Marksman
16-04-2008, 22:23
Adjustable FCD? Or just the electronic part of a boost controller?
Owen.
robwsurf
16-04-2008, 22:31
quess i ll have to phone dastek tomorrow and find out
robwsurf
19-04-2008, 17:37
finally got some pics of what i ve been upto well welded up rear bulk head and made axcess panel and welded up hole in boot floor which i cut for intercooler while it was there, painted chargecooler and used big hammer to move the water pipes abit to so it fits
could do with a bigger garage! and thats my 6kva generator as no power there
http://www.twobrutal.co.uk/forum/images/recovered/2008/04/213.jpg
Welded up boot engne bay area still needs a bit of grinding and seamsealer
http://www.twobrutal.co.uk/forum/images/recovered/2008/04/214.jpg
http://www.twobrutal.co.uk/forum/images/recovered/2008/04/215.jpg
http://www.twobrutal.co.uk/forum/images/recovered/2008/04/216.jpg
Plug welded its L shaped with captive nuts on the back for the panel to bolt too
http://www.twobrutal.co.uk/forum/images/recovered/2008/04/217.jpg
And the axcess panel made and fitted tidying them up and painting tomorrow
http://www.twobrutal.co.uk/forum/images/recovered/2008/04/218.jpg
http://www.twobrutal.co.uk/forum/images/recovered/2008/04/219.jpg
And the welded up hole in the boot i wish i never cut lol!
http://www.twobrutal.co.uk/forum/images/recovered/2008/04/220.jpg
And the chargecooler fitted will take better pics next time
http://www.twobrutal.co.uk/forum/images/recovered/2008/04/221.jpg
robwsurf
19-04-2008, 17:38
Tomorrow finishing plummey spoiler mod, weld and prep boot lid and start on turbo vents on engine bay!
robwsurf
23-04-2008, 23:40
Just spent more money i proberly shouldnt of oops
blitz nur spec!!! hopefully a quick chop of the middle pipe and it ll fit!
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&rd=1&item=280220778946&ssPageName=STRK:MEWN:IT&ih=018
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.