View Full Version : rear conversion?
hey lads, just wondered wot calipers and discs i could use on the back of my mk1b? iv heard that sw20 calipers fit (not sure if they meant the turbo or n/a) which allow me to use a vented disc on the rear but i wonder if the levin 20v rear calipers will fit? i have a set of vented discs to fit on the rear, if my memory serves me correct the rear mk1b discs are approx 5-6mm smaller diameter than the fronts?? i am open to correction
Gary Symons
28-12-2007, 15:38
Turbo and NA (22v calipers) are the same, have a read of Pauls big brakes pdf in the download section.
Also on my car:
http://www.mr2mk1turbo.co.uk/diary33.htm
Futher to this I believe you can use unmodified carriers with smaller discs, anyone confirm this?
Joshstix
02-01-2008, 07:04
You can use the 22v calipers with unmodified brackets and use AW11 front rotors with a ~6mm spacer between the hub and rotor.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.