Yes, these devices all achieve the same thing; forcing fluid uphill into the system.
Air generally rises, so bleeding it backwards actually makes more sense.
C.
I use the above tool for bleeding Mr2 clutches and it works perfectly, takes around 30secs to do.
Always Loved the Stylish MR2 but couldnt afford one, So in NY...Hondas are the things til my civic was stolen. Took my income tax return and bought me a MR2. So Now im getting around it. Saw the V6 swap and bought it. Just slowly in the process but for now i need my motor to run as healthy as she can. Found And Bought My Toyota service manual For my 92 MR2, had it taken apart, copied and laminated. I will post it all up incase anybody wants to use it for future refrence
even if the slave cylinder was open to the atmosphere for more than 3 days?
Thats good to hear, hopefully it works out for me
If the clutch was pressed while the slave cylinder was disconnected/opened, would that have a affect on it? being that the push rod isnt being placed back in its location from the fluids return. so technically it would be stuck out instead of returning to its original position
Aha, interesting. You might have dislodged the seal in the slave cylinder. So when you press the pedal it shifts around the piston rather than actually pushing it. Can't remember if there's two seals, inner and outer.
It might be worth taking the slave off and inspecting it, just in case. That way you know you're hot to trot. Or not. :)
C.
ok so today, i bench bled the clutch master cylinder but it isnt as stiff/strong/ or pressured as a master brake cylinder.....is it suppose to be like that or are they both suppose to have the same pressure.
aside from that, i still bled the bloody hail out of it........no problems there but it felt more softer than i usual feel it should be or my mind is playing tricks on me.
cant do nothing about bleeding it in reverse since the tool hasnt arrived, but the transmission fork isnt moving at all.......
if im correct, this will cause the ABS light to come on if you aren't a lucky person being that ABS does the pushing and doesn't like the return. You will simply bleed the brakes but send all the micro pieces of the master cylinder push rod seals to clogged a car equipped with ABS.
i could be wrong but that how I would see it theoretically