Anyone got a part number for camry shims ????
Anyone got a part number for camry shims ????
If it's not broken, let me have a go !!
i can get you whatever part numbers you need but there are around 40 different shim thicknesses,get back to me with the actual shim thickness you need
3.3
3.5
3.6
3.8
4.0 x 3
4.2
If it's not broken, let me have a go !!
half my post went missing ?
Thanks Paul
If it's not broken, let me have a go !!
oof! how come you need such thick shims mate? they are hoooge! the biggest toyota sell are 3.3mm thick,and ive never needed one that thick on any v6...are you sure you have worked those out correctly bud?
3.3 - 13753-74330
Thanks Paul !
Yes just checked now i'm back home and as you say 3.3 is the thickest.
Will double check before i order them.
Regards
Glenn
If it's not broken, let me have a go !!
I know how you feel , doing mine at the moment .
Engine Valve Adjusting Shims thinnest 13753-74010 2.50
Engine Valve Adjusting Shims 13753-74030 2.55
Engine Valve Adjusting Shims 13753-74050 2.60
Engine Valve Adjusting Shims 13753-74070 2.65
Engine Valve Adjusting Shims 13753-74090 2.70
Engine Valve Adjusting Shims 13753-74110 2.75
Engine Valve Adjusting Shims 13753-74130 2.80
Engine Valve Adjusting Shims size range 13753-74150 2.85
Engine Valve Adjusting Shims 13753-74170 2.90
Engine Valve Adjusting Shims 13753-74190 2.95
Engine Valve Adjusting Shims 13753-74210 3.00
Engine Valve Adjusting Shims 13753-74230 3.05
Engine Valve Adjusting Shims 13753-74250 3.10
Engine Valve Adjusting Shims 13753-74270 3.15
Engine Valve Adjusting Shims 13753-74290 3.20
Engine Valve Adjusting Shims 13753-74310 3.25
Engine Valve Adjusting Shims thickest 13753-74330 3.30
Good info, thanks Wombat.
Thread now stickyfied!
Owen.
----MY Manual SC------Lyn's Auto SC ---- NA/SC MK1.5 Donors-----
"What have you angle ground today?" :twisted:
TB BIG Affiliate - SWAT Motorsport Forum Link Picture Album Shop Link
Some of the shims we have from the existing engine have numbers on them like 37 & 39 i thought these were thicknesses but if what your saying is correct & the EPC certainly supports this. What do the numbers mean ? They're not even a part no, completely baffled and of course if we're right it means i can't get shims the thickness i need :(
If it's not broken, let me have a go !!
Can't take credit for the part numbers they were off a supra site :mrgreen: As for the numbers click here and then click on 3vz shim selection and all will be clear http://www.autozone.com/az/cds/en_us...rInfoPages.htm