Autostyle bodykit photos!

[superchargedsam]

Ok so car and kit went of this morning with Richard from car trans and what a top fella he is and would highly recomend him to anyone.

Was in a major rush getting things bolted back on to make it safe but took some quick and basic shots of the current kit, couldnt get front on properly in time for pic but shows the basics.

Rear section:

http://s9.photobucket.com/albums/a62...t=P1010084.jpg

Front spolier:

http://s9.photobucket.com/albums/a62...t=P1010085.jpg

Side skirts:

http://s9.photobucket.com/albums/a62...t=P1010086.jpg

http://s9.photobucket.com/albums/a62...t=P1010088.jpg

The kit is a pretty poor fit so when its put on the car it will be made a much better fit than it is currently and with a better final finish on it as well.

[Barronmr]

Looks brilliant. :thumbsup:

[superchargedsam]

Luke will look heluvalot better once some magics been worked on it, not a personal fan of bodykits persay, but am defo having this on the 1.5 now for sure!

[millentubby]

Cool!

found these pics;























more pics here http://www.mr2supercharger.com/StyleAutokits.html

[superchargedsam]

Love it on red ones but cant wait to see it on black! Did consider putting one on the red 1a thats arriving soon but that thought lasted .1 of a nanosecond!

[Marksman]

Sam, would it be possible to incorporate the front bumper / nosecone into the front valence section? I like the design but not the "looks like an aftermarket part held on with double sided sticky pads" bit. If it was all one piece then that'd make it look a lot more deliberate if you see what I mean.

Cheers,

Owen.

[Paff]

Sam you know I'm having one of these, well as soon as I can afford to do anymore to my car.

Like the idea there Owen. Would certainly look more in 1 piece. Altho there may need to be other thoughts on holding the whole lot together as there is the metal strip running under the bumper bar that might need to be thought about, dunno if that can be totally done away with with no consequences. Definatly worth Sam asking the fella doing the moulds tho.

[Jiff Lemon]

Be nice if you could get some functionality buily into those side skirts - Some ducting outlets so you could get some airflow to the back brakes or something.

And that rear bumper should definately have a second pipe option.

[Paul Woods]

sam would there be a possibility of getting your man to cast me an additional rear bumper centre section? say the middle foot of it? reason being i'll need to extend mine to fill the widebody rear and rather than make my own extension to the centre (very time consuming) it would be excellent if i had a small section of rear bumper i could graft in myself.....dont worry if its too much agro,i can always revert to plan A.

[superchargedsam]

Be nice if you could get some functionality buily into those side skirts - Some ducting outlets so you could get some airflow to the back brakes or something.

And that rear bumper should definately have a second pipe option.

Second pipe option should be no hassle as just a case of cutting and will need it for mine for sure for my 340r zorst! Am looking at ducting for front and rear breakes so will see what we can do on the rears.

sam would there be a possibility of getting your man to cast me an additional rear bumper centre section? say the middle foot of it? reason being i'll need to extend mine to fill the widebody rear and rather than make my own extension to the centre (very time consuming) it would be excellent if i had a small section of rear bumper i could graft in myself.....dont worry if its too much agro,i can always revert to plan A

Paul I can ask and dont see an issue with it really as it will just be a case of laying it up over just the centre section!