-
excellent news- i dont know which set up you are going to use jb but if you want the extra clearance you are more than welcome to have the shaft:)
-
I've used the V6 and ST185 combo Al and my mounts are now in so no going back but thanks for the offer;)
Don\'t look back!
JB 3.0 litre V6 swap complete Undergoing taxiing trials
-
E153 1993+ LSD drive shaft info needed
Hi,
Can somebody please provide a picture and measurements (or point me to a post I missed during my search) of an 1993+ Turbo MR2 factory viscous LSD 'intermediate' driveshaft (section that bolts to block). I believe they have a spline length around 28mm long but I am not sure......
I installed an E58 gearbox onto my AW11 (E58 = viscous LSD supercharged AE101 corrolla) ,and it came with a shaft where the drivers side spline is 30mm, which is longer than the SW20 splines I have heard of. But I think I need the SW20 shaft to install the equal length shaft setup in the car.
Cheers, Nick
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules