So using Speedsource mounts with your jig will end up with me having a bad time?
**when building a 3VZ AW11
So using Speedsource mounts with your jig will end up with me having a bad time?
**when building a 3VZ AW11
WoB "Lol, paul its totaly your fault everyone loves you. your gonna have to act like a dick more often."
PaulWoods "Go fuck yourself."
This is such a complicated issue to explain on the internet.....my jig works with Mk2 engine mounts, that's the mounting blocks on the engine and gearbox, both the speedsource brackets and the TB templates are just ways to weld something to the chassis to hold those Mk2 mounts, i would guess the speedsource brackets will need to be adapted to fit my jig, so that is the bottom line, if a bracket fits my jig it will work..... the jig is the important bit, not the brackets, you can weld two bits of scrap steel plate to the jig as long as it picks up on the jig holes you can hang the engine off it.
ok thank you Paul