Bought the Celica with head gasket issue but looking at it once I've taken the head of there is nothing obvious, however on taking the sump off I was welcomed with this
Bought the Celica with head gasket issue but looking at it once I've taken the head of there is nothing obvious, however on taking the sump off I was welcomed with this
Anyone know if D1FA are the standard size for the big end bearings?
OKay I'll ask another question as you didn't like that one :D
Do I have to undo the 4x huge Allen bolts to split this to get to the mains
from that pic, Id say yes....
but the top view would help make sure:)
of course I dont care, your a muppet!!!
http://www.testroete.com/car/Toyota/...isassembly.pdf just found this, page 5 seems to confirm.
Looking at that sump, you definitely want to swap a 1ZZ sump on to it afterwards!
I hate all southerners. As a point of reference, I'm stood at the north pole.
I've heard of that but not the reason, I figure on getting it all stripped & then taken to the engine machine shop & let them put it in their dishwasher to give the block & hopefully oil ways a good swill out. Not sure that it will work on the crank & camshafts need to ask them about it.
Also believe I've read somewhere there are a couple of mesh filters on the block, not looked for them yet
Look here for the filter locations - not in the block, in the head.
1ZZ sump is baffled - I'm genuinely shocked to see how shite the 2zz one is!
I hate all southerners. As a point of reference, I'm stood at the north pole.
The 1zz baffled sump is crap