rear wheel bearings where and what do i need

[filancia]

I have used a e reg mk1 mr2 as a donor for the fiat project and i am starting to build back up the rear.

I have seen there is a difference in wheel bearings for the mk1a and the mk1b what did i have if it was an e-reg.

Cheers

Simon

[cdwood2010]

Hi Simon,

E reg was most likely a Mk1b. There's a couple of comparison write ups if you Google it, but generally Mk1a cars went out with triangle pattern alloys, Mk1b with teardrop alloys.

Just in case that helps.

C.

[cdwood2010]

http://www.imoc.co.uk/forums/viewtopic.php?t=45035

[filancia]

Ah ok, well i still have one hub with the bearing in it, the worst case scenario i can strip it out and measure it.

[Tommytank]

Its a 1b Si!

[filancia]

Cool, I'll get a pair ordered up for the build up of the rear hubs.

Cheers guys.