Hello im new to the site but thought id post up a thread of my f355 kit car build sp here we go.
So to start with i was a tight ass and brought rubbish mounds none of it matches lol so mass fibreglassing to do.
1486851_738317372863830_1379759359_n.jpg
Heres my donor car a 2.0 3sge gt
Front end nice and easy to bolt on just needs lining up
Few pics of how the back started out
Moulds were terrible had to dry fit them then cut them to bits and start again.
Using a ford seirra Petrol flat as there easy to adapt.
Next problem the boot sits to high and to far back.
So guess what we had to cut it again.
Foam filled where needed then started the filling
Once finished with the filler work we fibreglass matted of the top and will scrap out the filler and do the same underneath.
Got lucky with these they are custom made to fit replicas so you dont need spacers
Then i got this and put on to you guys so here i am figured better get the right engine for her.
My new dials
My GEN F355 Back box
https://fbcdn-sphotos-b-a.akamaihd.n...70401445_n.jpg
New lightened fly wheel and cluch
https://scontent-b-ams.xx.fbcdn.net/...57601853_n.jpg
Ill post up more as it happens :)