Normally I wouldnt make a post that puts down a vendor, but Im not getting any replies from Speed Source.

I bought my engine mounts from Speed Source. The welds that they made on the rear mount had piss poor penetration. The other day I launched my car and heard *BANG* Crunch crunch crunch crunch,,,,

Fffffuuuuuu


It appears to me the rear mount broke first, which then overstressed the front mount which broke, which then allowed the engine to twist backwards and give the axles a large angle causing one to snap apart.

SO the lesson is. Make sure your torque mounts are strong! Make good welds.

Front mount


Rear Mount in car





Rear mount... very poor weld penetration most visible here.


Axle is Toast