Decided to use 87 mk1 rotors with a space underneath.
Currently running mk3 15in wheels and plan on upgrading to 15x8 wheels to keep wieght low. Dont need st205 stopping power unless I switch to 3sgte. Also plan on removing stock brake valve and installing manual on and upping the MC to 1in 4runner unit.
Started working on the brakes this weekend and made some good progress. Got the master cylinder and the proportioning valve swapped out amd the ST165 brakes and mk1b EBC rotors. Sadly when I went to install the EBC yellowstuff pads I found out that EBC only has ST185 pads. Because of this Im working to exchange the EBCs with some Carbotech AX6s since they are one of few companies that have both the pads I need. Also found some 93+ turbo rears finally which are really hard to find in the states. Talk about some serious improvement in rear heat retention:)