Mk3 3sgte install

[kayjay0_7]

I'm looking to carry out a 3sgte install on my Mk3 but not too sure where to begin



Ideally i'd like to build up a collection of parts and start the swap later on in the year

Luckily my dad is quite handy with a welder so i'm sure he'd be able to fabricate some engine mounts for me

Shopping list

1) Turbo engine and gearbox package
2) turbo/uprated fuel pump
3) charge cooler setup
4)
5)
6)
7)
8)
9)


one thing i'm really unsure about is the driveshaft and hub setup (ideally I'd like to go with turbo hubs so I can run 5x114 wheels

[mrT]

Mk2 turbo gearbox and drive shafts
After market ecu
3sgte engine loom.
Downpipes
Full 3sgte engine with injectors turbo. Exhaust manifold etc

[nik]

St205 ECU and chargecooler pump.

[kayjay0_7]

So is there a difference between the 3sgte engines in the mr2 and the gt4

Would I need to get an engine bay wiring loom from a gt4 st205

[nik]

i did a standard rev3 swap into a mk1 and added the st205 ECU and chargecooler later if that helps, should think the loom is pretty much the same but the ECUs are different im guessing. i had to get the st205 ecu to monitor the CC pump..plus with jon soles info the st205 ecu is tweakable.

[kayjay0_7]

i did a standard rev3 swap into a mk1 and added the st205 ECU and chargecooler later if that helps, should think the loom is pretty much the same but the ECUs are different im guessing. i had to get the st205 ecu to monitor the CC pump..plus with jon soles info the st205 ecu is tweakable.

there are a couple of st205 ecu's on ebay so will probably get one of those as well as a st205 chargecooler core etc

I've managed to get in touch with one of the guys on spyderchat who has carried out a similar swap, so I need to source a camry outer cv joint to modify one of the turbo driveshafts

[myers]

i have a near on full kit that im going to sell if your interested???
I originally bought it for a mk1 conversion then was going to shove it in the mk3 but it never come about.