123456 ...

thread: My mk3 2gr build

  1. #11

    May 2012
    Milwaukee, WI
    83
    Passenger Mount. I am using innovation engine mount as the passenger mount is a lot stronger. My stock mount has too much free play to get a good measurement of it. I'm not sure if the mount will last itself (84,000 miles on stock passenger mount). I am using the stock mount to for measurement since the bolt hole are a lot smaller for a precision measurement (10mm vs 12mm innovation).





  2. #12

    May 2012
    Milwaukee, WI
    83
    A little explanation. Only on the stock one. Once all other bracket has been made we'll see what happens with the stock mount again. I might had to do some adjustment on CAD for the stock passenger mount.

  3. #13

    May 2012
    Milwaukee, WI
    83
    Driver mount. 1/4 1018 cold roll.




  4. #14

    May 2012
    Milwaukee, WI
    83



  5. #15

    May 2012
    Milwaukee, WI
    83
    Front bracket is completed. Fits great. I got my vipec in Friday. I hope to get the crossmember modded and fitted tomorrow or else I have to wait until next weekend due to exams. I have to go by a cutter, wish I could afford a plasma cutter right now :)


  6. #16

    May 2012
    Milwaukee, WI
    83


  7. #17

    May 2012
    Milwaukee, WI
    83



  8. #18

    May 2012
    Milwaukee, WI
    83
    Since I was taking pictures of the front bracket here's a view of clearance. Tight fit.



  9. #19

    May 2012
    Milwaukee, WI
    83
    Got the cross member cut up. I might have to cut the other side to clear headers but I will do that down the line when the time come. It was kind of fun cutting it up. The weathers a little chilly but I'm just glad to be outside today.



  10. #20

    May 2012
    Milwaukee, WI
    83


123456 ...

  •