I spy a corvette mmm tasty.
Just getting the gap lines sorted
This square bit is where the roof scoop will go so this has to painted before i put the roof scoop back on as i am fiberglassing the roof 10mm
Just getting the door gaps sorted bit of sanding ahead
A few small pin hole to be filled in
This is the sun visor i had made just putting it on
Just getting the lines before i cut it
Got the rest of the visor done
Put the red pin stripe on (This was the easy part)
Roof scoop all painted white ready for carbon fiber
Replaced the indicator bulb to a 21watt bulb
Drivers side rear light all wired
Spaghetti junction
Indicators all working at last just need to be wired into the mr2 harness
Rear lights all working
A friend in the UK sent me this over
A friend of mine bought his daughter a 106 starter car so i decided to give him a hand in changing the rear axel
Axel out
Secondf hand axel all re-done and put back in
All back in
Ok filler arrived that was ordered months ago from Spain so i started skimming the car im going at it in three stages as i want to keep the lines on the car
Top section first
Middle section next
Lots od sanding ahead
Second section skimmed
Front bonnet skimmed
As you can see the low spots wher the black is
A few low spots left
Bonnet all sprayed black ready for block sanding
Blocked sanded and re-filled the low spots
Still on section 2 a few low spots this side of the kit was the worst due to the previous owner storing them in the corner of his garage in a heap
As you can see the skim looks heave but it light as you can still see the white gel coat underneath
Bonnet coming along
The 3rs section skimmed it looks heavy but its not if you look closely you can see the white gel coat
Nice work mate, keep it up! Even looking at all that sanding is making my hands hurt
@ hmmmmm - yip its hard work but will be worth it
Great build Peggyontherun. When you finally finish and get her on the road, whatever you do don't do this!
http://news.uk.msn.com/video-clips/?VideoID=1j45s3gwn (and wait for the 20 second add to finish)
The 3rd section skimmed
Sanded the black spots all low spots
Low spots all re-fillered
Front section getting skimmed
Bonnet section nearly done
Block sanding coming along
Front sprayed for low spots
Only a few spots left
Front splitter remove and car jacked up for easy sanding
Coming along
Front bumper skimmed
It's coming on looking better and better keep those updates coming.