3vzfe cam & Engine Specs & Questions

[goddom]

Sorry if this is redundant post, but I have been searching for a few hours and I haven't found this information yet. I am specifically trying to find the Lobe Center angle and degreed centerline for both the intake and exhaust.

This is the information I have collected already. Hopefully its all right. If you have any other data that you want to contribute I would appreciate it. I am putting together a database of all the suspension and 3vzfe engine data for a 91 MR2.

Engine Data
Displacement: 3.0L
Firing Order: 1-2-3-4-5-6
# of cams: 4
Bore: 87.5 mm
Stroke: 82 mm
Comp. Ratio 9.6:1
Rod Length Ratio: 1.8:1
Rod Length: 147.6 mm
Peak HP RPM: 5200 rpm
Crank Pins: 55 mm
Main Journals: 64 mm

Cam Data
Overlap: 12 Degrees
Valve Spring Length: 41.4 mm
Valve Spring Tension: 41.9 - 46.3 lb/ft
Valve Spring Tension (Nose): 95 lb/ft
Valve Spring Rate: 154.7 lb/ft

Intake Cam Data:
# Valves 2/cyl
Duration: 230 Degrees
Valve Head Dia. : 34 mm
Valve Stem Dia.: 6 mm
Lift: 7.85 mm
Degree Centerline: ???
Lobe Center Angle: ???
Lobe Height: 42.1 mm

Exhaust Cam Data:
Duration: 230 Degrees
# Valves 2/cyl
Valve Head Dia. : 34 mm
Valve Stem Dia.: 6 mm
Lift: 7.6 mm
Degree Centerline: ????
Lobe Center Angle: ????
Lobe Height: 41.01 mm

Thanks!