My OBX LSD ZZW30 arrived today
And then I pulled it apart
Here are some discussions with regards to the bellville washers and gear directions.
http://forums.hybridz.org/index.php/...e-with-pixors/
http://forums.hybridz.org/index.php?...d-installation
http://rbryant.freeshell.org/obx_washers.htm
http://forums.clubrsx.com/showthread.php?t=520556
The unit looks fairly good, the bolts were good (12.9's, none stripped or too short), though I found both the bellville washers installed with no preload and I found the gears were in the wrong direction (I think :P). I'll be cleaning the rough machine marks up and replacing the bellville washers before assembling for installation. Will post more information on this as I progress :)