mk1.6 transmissions and driveshafts

[sixafterfour]

Alright, i think we need to have one of these threads for the mk 1.6.
For the 3vz-fe and the 1mz-fe swaps into the mk1 mr2 there are these options available.
EDIT: updated 5/15/09

Transmissions and Driveshafts

E153-Non LSD-
-ST185 Front Driveshafts with v6 auto output shaft.*/**
-Mk2 turbo non lsd shafts with st185 outer CV joints (partsinabox number OJ-0220/30) and mk2 turbo supported shaft.**
-Mk1 SC shafts (non supported set up)

e153-LSD- (going to need a mk2 rev1 mechanical speedo drive,or a mk1 SC one)
-mk2 lsd drive shafts with st185 outer CV joints (partsinabox number OJ-0220/30)**
-Two left side Mk1 SC shafts bolted to mk2 turbo LSD output stubs **
-st185 shafts bolted to mk2 LSD output stub on the left side and v6 auto supported shaft on the right side.*/**

s54-(with LSD or not)(either late rev5 mk2 box or non LSD box fitted with mk3 LSD) and non LSD
-Mk2 NA shafts
-Any 3sge engined celica shafts,these use a supported shaft and will need a bearing carrier bracket making
-Mk3 shafts,again a supported type and will need a bearing carrier bracket making.


*Anything using an st185 driveshaft with camry v6 auto supported shaft will have a different engine location (sitting about 20mm further to the right) due to the left shaft needing more space to fit.The v6 jigs out there are configured for a mk2 turbo or mk2 NA shaft placement)

**All E153 onto either 3vz or 1mz engines will require the carrier bearing moving 4mm towards the diff on the supported shaft.


Transmissions, Clutches and Flywheels
Note: 8 flywheel bolts (part 90105-10207 from your dealer, really cheap), they are mk1 NA flywheel bolts

e-153 Turbo tranny (LSD or not)
-Modified Turbo Flywheel(elongate the holes) and complete turbo clutch
-3vz-fe or 1mz-fe flywheel and complete turbo clutch

s54
-a fidanza flywheel (Part#130881) and a turbo pressure plate and an N/A friction plate
-a 5sfe flywheel that must be machined then a N/A pressure and N/A friction plate
-a 3vz-fe manual flywheel with Turbo pressure plate and a N/A friction plate
-Mk2 N/A flywheel and complete Mk2 N/A clutch.