Hi everybody, I need help.
I have a mk1.5 with a rev 3 engine and gearbox, I've had it in the car for a number of years and filled the gearbox when doing the initial swap. I've spent the last month or so getting it back sorted for a track day this Saturday, one of the jobs was changing the gearbox oil. I drained the gearbox oil and there was barely a litre in it. I filled it back up and managed to get just under 3.5 litres in, over the next couple of outings I realised I had a leak but couldn't find anything leaking out of fill or drain plugs or the gearbox seals. On further investigation I noticed it dripping near the three bolt holes that originally had a mounting bracket fixed into them. The top and bottom bolt holes are blanked off inside at the end of the threads but I noticed the middle bolt hole is not and I wondered if this could be where it is leaking from, can anyone shed any light on this as it's driving me crazy and the clocks ticking for the weekend.