what wheel arch panels

[cabbydave]

what other wheel arch panels can be used for the rear of the mk1 ive tried getting mk1 corolla ones from hadrian panels but they are out of stock and havent got any on order anyone got any segestions what i can use instead my arches havent completely gon but might as well do them now before the inners go as well

[Gary Symons]

Try this guy: (will also sell individual panels)

http://cgi.ebay.co.uk/TOYOTA-MR2-MK1...3%3A1|294%3A50

[Paul Woods]

Or Datsun cherry N12 model 3 door rear arches are very similar to the corolla ones, i've used them to good effect in the past.

[semtexcow]

ive used that ebay guys rear repair panels on my aw11, their fine and arrive quick :)

[cabbydave]

cheers Paul ordered them and got them now £19 delivered I recon I can use the bottom bits that im not going to use asi've got the sill repair sections as well to repair the inner wing as its only got rott on the last 3" of it lots of wax oil later might just design some sort of drain between the inner and outer sill as well couple of good smacks with the old hammer should sort that out oh and ive found some more welding happy days mot tester must have still been drunk good think about getting it tested 8 am on a saturday

[Paul Woods]

You're very welcome, it all helps keep our little mk1's alive.

[cabbydave]

Got one done took all saturday afternoon but looks a whole lot better rolled the arch just inn case for a later date so as not to wreck the paint if I ever go wider rims

[lastoneout]

Do you have any photo's of the work?

[cabbydave]

http://i66.photobucket.com/albums/h2...7062009064.jpg

[lastoneout]

Thanks, I ordered a corner section from a boy on ebay. It was well made but one of the previous owners of my car had a go at repairing the arches and on the face of it it looked not to bad but I would have had to do a lot of work to get it to fit & I have not got round to playing with my welder yet. So I had my first go at fiberglassing taking a casting from the corner section I bought, and not wanting to blow my own trumpet I has turned out looking not to bad.

http://i918.photobucket.com/albums/a...ut_2009/21.jpg
http://i918.photobucket.com/albums/a...ut_2009/24.jpg