Cheers i have so say the kit was in some state as you can see from the block sanding but at least this kit will the light of day the amount of kits out there in peoples sheds is unreal
Printable View
Cheers i have so say the kit was in some state as you can see from the block sanding but at least this kit will the light of day the amount of kits out there in peoples sheds is unreal
I wonder how much those kits in people's sheds go for?
Ok nothing major going on only that my arms well i cant feel them anymore
Drivers side 95% done
http://img502.imageshack.us/img502/3286/sanding001.jpg
Front bumper nearly all done
http://img831.imageshack.us/img831/6686/sanding002.jpg
Passenger side left so start at the rear
http://img585.imageshack.us/img585/5523/sanding003.jpg
First skim of filler
http://img39.imageshack.us/img39/4953/sanding004.jpg
Passenger side bonnet quiet a few dip in it
http://img23.imageshack.us/img23/5629/sanding005.jpg
Ariel shot its just so big
http://img526.imageshack.us/img526/723/sanding006.jpg
There is a Toyota Mr2 in there somewhere
http://img98.imageshack.us/img98/9568/sanding007.jpg
The line that has to be skimmed
http://img225.imageshack.us/img225/8943/sanding008.jpg
First skim of filler
http://img215.imageshack.us/img215/3622/sanding009.jpg
Sprayed black for low spots
http://img29.imageshack.us/img29/4797/sanding010.jpg
All block sanded and re-fillered the fiberglass whoever layed is pure crap
http://img811.imageshack.us/img811/8066/sanding011.jpg
Getting there pity popi isisnt around
http://img36.imageshack.us/img36/6913/sanding012.jpg
All sanded the first section and a new top line i had to do
http://img140.imageshack.us/img140/8128/sanding013.jpg
Second section skimmed and left to dry as i was wrecked by 4 o clock i had to call it a day as it was 21 degrees out
http://img859.imageshack.us/img859/1527/sanding014.jpg
gorgeous ... sooo beautiful .. man you are doing something fantastic
Lots of skimming going on
http://img641.imageshack.us/img641/6206/lamboooo001.jpg
All sanded
http://img443.imageshack.us/img443/4238/lamboooo002.jpg
Alot of low spots
http://img37.imageshack.us/img37/5213/lamboooo003.jpg
Coming along
http://img812.imageshack.us/img812/3500/lamboooo004.jpg
Still a bit to do
http://img194.imageshack.us/img194/2421/lamboooo005.jpg
All the low spots nearly gone
http://img33.imageshack.us/img33/8476/lamboooo007.jpg
I cut the new closing lines on the front bonnet
http://img842.imageshack.us/img842/1007/lamboooo013.jpg
Getting there now at last
http://img802.imageshack.us/img802/8176/lamboooo015.jpg
really taking shape now..thats a lot of sanding!!!
You're gonna have a right arm like Popeye, be careful you don't tug your nob clean off lol
Seriously though, looking great, i KNOW how much work all of that is, not to mention my browser shits itself when loading your thread, great stuff.
@ nik - cheers mate
@ Paul Woods - yip my owl arms are fit to drop getting close to primer now about a week away sending off the roof scoop to get it carbon fibered dipped to that will be back in a week then fiberglass the roof work work :eusa_wall:
After cutting the lines for the front bonnet a bit of sanding going on. All this front section has been made by hand
http://img708.imageshack.us/img708/2...bobooth001.jpg
http://img215.imageshack.us/img215/9...bobooth002.jpg
A bit of filling and sanding on the bonnet
http://img841.imageshack.us/img841/5...bobooth003.jpg
Ok moved the Lambo/MR2 out of the unit for a clean up
http://img594.imageshack.us/img594/1...bobooth004.jpg
http://img834.imageshack.us/img834/2...bobooth005.jpg
http://img217.imageshack.us/img217/3...bobooth006.jpg
Front section getting close to primer
http://img41.imageshack.us/img41/629/lambobooth007.jpg
Primed one coat
http://img441.imageshack.us/img441/5...bobooth008.jpg
Underside of the bonnet primed
http://img543.imageshack.us/img543/8...bobooth009.jpg
Drivers rear quater all sanded and pin holes filled
http://img834.imageshack.us/img834/2...tsanded001.jpg
http://img441.imageshack.us/img441/1...tsanded002.jpg
First coat of primer
http://img33.imageshack.us/img33/3866/wetsanded003.jpg
http://img853.imageshack.us/img853/4...tsanded004.jpg
All wet sanded
http://img19.imageshack.us/img19/4020/wetsanded005.jpg
Second coat or primer
http://img38.imageshack.us/img38/3301/wetsanded006.jpg
Bonnet pins on and gapping the bonnet
http://img62.imageshack.us/img62/9608/wetsanded007.jpg
Two coat of primer on the door and five on the rear quater its coming along now
http://img205.imageshack.us/img205/9436/primer2001.jpg
While the primer was drying i made this
http://img256.imageshack.us/img256/8118/primer2002.jpg
Test Fitted
http://img546.imageshack.us/img546/4240/primer2004.jpg
http://img16.imageshack.us/img16/2290/primer2005.jpg
Primer coat three on the door
http://img405.imageshack.us/img405/151/primer2006.jpg
Front wing ready for primer
http://img20.imageshack.us/img20/2659/primer2007.jpg
First coat or primer
http://img580.imageshack.us/img580/3285/primer2008.jpg