-
Glad to hear I was on the right track Brian.
I think with extra wide spacers and offset on yours, it's imperative that the handling set up is given full attention and this is a good start.
If you do change your current RCAs then drop me a PM, I may be interested.:thumbsup:
-
Its been a while, but it appears I've sorted the mystery of the twitchy back-end.
Replaced the Rear tie rod hub end inner bearing bushes (the ones where the old ones need to be pressed out ,and have a metal sleeve) with a new pair from MR2 Ben, £95 the pair, came with galvanized bolts. I wasn't happy with the slack between the bolts and the inner bush sleeves, so had Hassets Precision engineering near me, make a set of high grade stainless bolts, with finer pitch and no slack. Simply lovely M-way cruising now, 120mph no problem, and it kept accelerating, wonderful stuff (won't say where I did this, but managed to stay in treble figure mph for a good 25 mins, not much on the motorway), no sweaty moments
http://www.twobrutal.co.uk/forum/ima...014/11/191.jpg
http://www.twobrutal.co.uk/forum/ima...014/11/192.jpg