Hose diameters

[randomfactor]

I'm sure I've seen something on here. Can anyone please let me know the internal diameter of the coolant hose, just above the gearbox and the diameters of the tank vent pipes. My car isnt to hand for me to measure at the moment

Cheers
Guy

[mr2aw11turbo]

The man from Durham, he say 16mm ID


http://forums.twobrutal.com/showthread.php?t=2654

[randomfactor]

I think 16mm is for the heater pipes. I should have been more specific, the coolant hose diameter that I am after is the larger bore hose. My current setup goes over a bracket on the gearbox and will eventually chafe, I'd like to re-route with some new hose before JAE, since its a fair old drive

[adamh]

largest bore is 30mm.. (the thick rad pipe hose that connects to water outlet on head) and points toward front bulkhead.

the other one that go's right over the left side mount bracket (if you laid it that way as i did) and round underneath the dizzy angled on the back side of the block is... 19mm

[randomfactor]

Thanks for the info, I have managed to find a pic during installation and I have highlighted the hose, it is the larger one that points forwards - must be 30mm then
http://guynet.homeip.net/openarea/Screenshot1.jpg

Edit - Now resized, howzat?

[adamh]

yes siree, 30mm i.d rad hose, less than 8 quid/metre at a unipart etc.
you couldnt resize that pic down a bit fella.. max size 900 x 600 :praise2:, or upload as an attatchment it shrinks it.