PDA

View Full Version : Saggy bum



OlberJ
20-04-2009, 21:20
What's causing this with Bob, is it simply the wrong rated springs for a Mk1 with the 3VZ in there?

http://www.twobrutal.co.uk/forum/images/recovered/2009/02/126.jpg

I'd quite like to have the car sitting either level or a slight nose down stance.

What's the solution, stiffer springs from someone like Fensport or are they all going to sit like that? Does we need coilovers?

craig87
20-04-2009, 21:32
go with coilovers mate, if your going springs and dampers its best to get corner weighted i believe so you know what rate springs you will need.

toffer
20-04-2009, 21:46
mine still sat like that with kyb and fensport springs, sorted the problem with ground control coilover sleeves:thumbsup: they mate the springs to what shockers you have, ........

OlberJ
20-04-2009, 23:07
It's a brand new Koni setup, Lesjofor springs though, no idea if they're good or bad.

Would a stiffer spring with less of a drop work u think?

toffer
20-04-2009, 23:38
but what you would pay for them, you get ajustable coil over setup, look at there web site and give mark a ringhttp://www.ground-control.com/ hope this helps

OlberJ
20-04-2009, 23:42
$400 dollars though, i could get springs for about £50-100 i would've thought. Mind it's only the rears i want.

toffer
20-04-2009, 23:52
[:(sorry cant help anymore,

semtexcow
21-04-2009, 00:35
i dont know what the diameter of the toyota struts are?
but if there about 2" try any old ford rallying centre, coilover conversions for about £80 including springs
using 2.25" springs you can choose whatever rate of spring or length required and £40 for a pair of springs