PDA

View Full Version : azev a



keithburke
11-08-2008, 21:12
hi lads just looking for some advice on wheels i am currently keeping an eye on these do you think they would fit my mk1 i was also thinking of getting pauls wide arches aswell and these wheels wood look good with them adxise much appreciated http://cgi.ebay.de/ws/eBayISAPI.dll?ViewItem&item=120291559052&ssPageName=ADME:X:RTQ:DE:1123

OlberJ
11-08-2008, 21:15
You'd need some spacers on there to make full use of them but yes, they'll fit a mk1.

Look like 4 stud, ET30, 9" wide.

Just a shame they're not the dished ones.

OlberJ
11-08-2008, 21:17
Aha, jus seen they're staggered, even better, 9" dished on the back, 7.5" on the front.

keithburke
11-08-2008, 21:19
ye i think they are dished

OlberJ
11-08-2008, 21:22
They are, the 9" ones are dished, looks much better.

Think you'll end up with about a 2" arch at the back and nearly standard fronts if you don't use spacers.

That setupo for the arches will look minted though, subtle, slightly wider arches are just as good as lairy as fuck 4" jobs.

chriss
11-08-2008, 21:27
9.0x16 rear 7.5x16 fronts are my weapons of choice. you will need spacers and wide arches, good choice though.

keithburke
11-08-2008, 21:27
i might need spacers to clear my st205 calibers atleast if i get them i could the arches to fit instead of fitting the arches them getting wheel the bloke has them in germany might put a bid in after 70euro delivery ti ireland not bad

OlberJ
11-08-2008, 21:29
The ET30 offset should be fine for clearance, dunno for sure though.

Definitely best getting the wheels first and then matching the arches to the wheels.

chriss
11-08-2008, 21:31
thats the way mate easier and cheaper to get arches to fit your choice of wheels

keithburke
11-08-2008, 21:35
thanks lads feel a lot better know that i got positive comments definetly goin to try a get them

OlberJ
11-08-2008, 21:37
Jus check the PCD is 4x100.

I think it will be as most Azev A's are if they're 4 stud but worth checking.

chriss
11-08-2008, 21:43
Ive already checked these out for my car Keith and they are good to go.

keithburke
11-08-2008, 21:47
ye i will email him know about the stud patter , chriss do you have them on your car already

chriss
11-08-2008, 21:49
Or you might like these

keithburke
11-08-2008, 21:55
there definetly deep dish saw a something like those a few years ago on a golf

chriss
11-08-2008, 22:00
lovely deep dish Keith, look gorgeous but totally impossible to keep clean

keithburke
11-08-2008, 22:02
just emaild the man in germany so hopefully he will get back to me soon and confirm the 4x100

keithburke
11-08-2008, 23:54
just had another look at the wheels i think there of an audi 80 muy german is not the best will have to wait and see when he emails me back

chriss
13-08-2008, 05:08
keith not 100% but i think these are five stud only was getting mixed up with Borbet A wheels which are 9x16 rear 7.5x16 front and are four stud.

chriss
13-08-2008, 05:23
:thumbsup: :thumbsup: :thumbsup:

OlberJ
13-08-2008, 08:38
keith not 100% but i think these are five stud only.

U mean the Azevs?

No, definitely can get them in 4 stud, have a look at Jack and Adam's car ;)