View Full Version : Best place to tap a switched live? (mk1)
Gary Symons
08-08-2008, 10:15
As per the title, I have a sequential shift light and a wideband air/fuel gauge to fit. Is there a convinient place to tap off a switched live feed in the dash area?
Also I guess the shift light could be connected straight to the rev counter signal line where it enters the dash?
Ta
ciggy lighter always does it for me..
You can use the feed for the hazard switch too if required.
rev counter is black w/ gold spots i think..
Gary Symons
08-08-2008, 10:30
cheers guys :thumbsup:
Gary Symons
10-08-2008, 14:21
For info if anyone else fits a shift light to their mk1, the rev counter signal can be taken from straight behind the dash panel. Colours may vary but the pin you want is marked 'IGN-' (fifth wire from right -black)
Pic here:
http://www.mr2mk1turbo.co.uk/photos/dash-wiring.jpg
Yep, we use that for the aftermarket Rev counter an all. :thumbsup:
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.