Extending hub center AW11 for brake up grade

[NZ84vvt]

The Plan
http://www.twobrutal.co.uk/forum/images/recovered/2008/03/87.jpg
4 jaw & cut to 52.2mm Dia
http://www.twobrutal.co.uk/forum/images/recovered/2008/03/88.jpg
Bore old brake piston to 52mm Dia
http://www.twobrutal.co.uk/forum/images/recovered/2008/03/89.jpg
Press together
http://www.twobrutal.co.uk/forum/images/recovered/2008/03/90.jpg
machine to 54mm
http://www.twobrutal.co.uk/forum/images/recovered/2008/03/91.jpg
Bore excess material away
http://www.twobrutal.co.uk/forum/images/recovered/2008/03/92.jpg
paint
http://www.twobrutal.co.uk/forum/images/recovered/2008/03/93.jpg
Longer studs
http://www.twobrutal.co.uk/forum/images/recovered/2008/03/94.jpg
reassemble on car after cutting slots for split pin
http://www.twobrutal.co.uk/forum/images/recovered/2008/03/95.jpg

[Tom G]

That's a coincidence, I was tinking about that yesterday!
http://forums.twobrutal.com/showpost.php?p=144000&postcount=10