View Full Version : Recommend some gasket goop.
jimgreen
16-10-2007, 21:25
Starting to put the engine back together now, what do people use on parts that done have a 'normal' gasket. From memory the sump, bits around the water pump etc etc.
Thanks
Jim
Any silicon sealer will do , i tend to spend a little more and get Loctite stuff in mastic gun as it's closer to OEM sealer .
most motor factors will have plenty of different brands of the stuff to choose from mate
but as he said ^ spend a bit more and get a quality name.
jimgreen
16-10-2007, 21:57
yeh, knew it was a silicon. Just wanted a brand :)
Thanks guys, my build is really coming on now.
Sponge Bob
17-10-2007, 08:45
I recall Hylomar being good stuff - have started using it myself and it seems ok...
Any hi-temp oil resistant Silicone RTV sealant will do
The gasket set I got from the states had pretty much every gasket including the sump - my water pump came with a gasket aswell, in the manual it says to use some rtv sealant
millentubby
17-10-2007, 13:14
Just go into your local motorfactor and ask for RTV Instant Gasket Jimmer - they'll hook you right up.
For the record the orange one has the best flavour.
Thanks for that Ralph. lol
btw you should have used some of this when you put the cam covers back on - check the manual and it shows where you need to put blobs of the stuff.
jimgreen
17-10-2007, 16:03
Can someone send me this manual everyone keeps going on about :) ?
Sorry, i meant that to do that mate.
Can't promise owt tonight but if i remember in my innehbriated state i'll send it through.
its the haynes manual for the camry
Wynns gasket maker is good as well mate :)
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.